Replacing Air Damper Seals in Los Altos

Our company in Los Altos offers Replacing Air Damper Seals Services near you. The seal’s wear is most often found in old fridges. But even in new technology, it can become unusable as a result of careless operation or obscene installation. Damage to the sealing gum leads to a change in the temperature regime in the fridge under the influence of warm air entering it. As a result, in order to create and maintain a set temperature, the fridge compressor will work without shutting down, which may lead to failure more quickly. A breakdown of the compressor motor will result in an expensive repair for the owner. To prevent the happening of such a serious malfunction, it’s better to take care of replacing the damaged seal in a timely manner.

Los Altos Replacing Air Damper Seals: The order of work

If the seal is damaged, the following works are performed during replacement:

• The master removes the fridge door. He removes the old rubber band around the perimeter of the door, carefully separating it so as not to damage the door. The remnants of glue or foam are carefully cleaned from under the door lining to ensure a tight fit of the new seal. When the groove in which the sealer was placed is empty, it’s time to start fixing a new rubber band. Its thickness should be slightly larger than the width of the groove to ensure reliable fixation of the seal in the fridge door.
• The master fixes a new elastic band. The joints of the two ends of the seal are firmly connected to each other and glued together.
• The door is attached to the fridge.

The procedure for replacing the rubber seal seems simple only at first glance. We don’t advise you to experiment on your own! Incorrect selection of the seal, fixation, leaky processing of joints or careless fastening of the door can result in hours of useless work for a layman, as a result of which problems with the presence of gaps will stay unresolved.

Our appliance repair – just book a call and we’ll contact with you during 30 minutes.